TEK E-INDUSTRY GRP CO.,LTD Address: 126,Tianma Rd, Qinxiyang Industry Zone, Fuan, Fujian, China P.C: 355000 Tel: 0086-593-6797136 0086-593-6338998 Fax: 0086-593-6797138 Mob: 0086-18033963558 Website:http://www.tek-cn.com E-mail: firstname.lastname@example.org email@example.com MSN: firstname.lastname@example.org Skype: tek-tema Yahoo MSG: tema liu Trademanager: cntek QQ: 704107616
IS SS Horizontal Single-Stage Centrifugal Pump
Application IS Stainless steel horizontal single-stage centrifugal pump is a sort of multifunction product with wide application. It may transmit various mediums including water or industrial liquid and is suitable for different temperature, flow rate and range of pressure. Its typical application mainly in codes the following aspects: Water supply: filtration in water works, transportation and subarea water carriage, pressurization of main duct; Industrial pressurization: flow wetting system, cleaning system; Transportation of industrial liquid: water supply of boiler, condensed system, cooling and air-conditioning system, machine tool support, acid and alkali transportation; Water treatment: distilled water system or separator, swimming pool, etc.; Irrigation of agricultural land, petrochemical industry, medicine and sanitation, etc.
Installation requirements SI Stainless steel horizontal single-stage centrifugal pump is the direct connection by pump shaft ,composed of pump ,pump shaft and standard motor: 1. The pump shall be installed on the ventilating and anti-freezing place; 2. The installation of the pump shall ensure that the pump will not be influenced by the tension of pipeline; 3. If the pump is installed outdoor ,suitable outer cover must be configured to prevent electric elements from water inflow or coagulating dew; 4. To facilitate in section and maintenance ,enough space must be left around the machine group ; 5. Electric wiring device shall guarantee that the pump will not be damaged by lack of phase ,unstable voltage ,current leakage and overload ; 6. The pump shall be installed on the pedestal horizontally .Horizontal direction is the suction port for the pump ,and vertical direction is the discharge port for the pump .
Operating condition Clean, thin, non-flammable and explosive, not containing the liquid with solid particle and fibre; Liquid temperature -20℃/ +100℃; Ambient temperature: up to+40℃; Altitude: up to 1000m; Max. pressure of the system is 10bar.
Motor TEFC motor,2-pole; Protection class:IP55; Insulation class: F; Standard voltage, 50Hz: 1×220V 3×380V